1. Coway
  2. AIRMEGA
  3. Airmega AP-1512HHS FAQ
Submit Request Icon

Back to Support Home
|
  1. Coway
  2. AIRMEGA
  3. Airmega AP-1512HHS FAQ
Filter Maintenance for AP-1512HHS

MAKE SURE THE UNIT IS TURNED OFF AND DISCONNECTED FROM THE POWER PLUG BEFORE CLEANING

Clean your Pre-filter when the Pre indicator light is on by following the steps below  (typically between 2-4 weeks):

Open the front cover and gently pull it.

1512HHS_-_PRE-FILTER_CLEANING_1.jpg

Press down on the top clip of the pre-filter to remove it.

1512HHS_-_PRE-FILTER_CLEANING_2.jpg

Carefully wash with water or vacuum the pre-filter as needed.

1512HHS_-_PRE-FILTER_CLEANING_3.jpg

MAKE SURE THE PRE-FILTER IS COMPLETELY DRY BEFORE INSTALLATION
Once clean, dry, and ready for installation, gently put the pre-filter back into its designated slot and attach the front cover.

1512HHS_-_PRE-FILTER_CLEANING_4.jpg

Articles in this section

  • Adust Air Quality Indicator Sensitivity
  • Setting up the AP-1512HHS
  • Understanding the AP-1512HHS Air Quality Light Indicator
  • Air Purification System of AP-1512HHS
  • Filter Replacement for AP-1512HHS
  • Filter Maintenance for AP-1512HHS
  • Cleaning the Airmega AP-1512HHS