Maintenance and Cleaning Method for Airmega Icon

MAKE SURE THE UNIT IS TURNED OFF AND DISCONNECTED FROM THE POWER PLUG BEFORE CLEANING
Do not use detergents that contain organic solvents (solvent, thinner, etc.), bleach, chlorine, or abrasives.
Please do not put the air purifier in water or spray water directly on it.

CLEANING THE AIR QUALITY SENSOR

Clean the lens, dust inlet, and dust outlet with a wet cotton swab, and then remove water with a dry one.

Pollution_Sensor_Cleaning_1.jpg

Use a soft brush or vacuum cleaner for the inlet and the air outlet of the air quality sensor.

Without regular cleaning, the performance of the air quality sensor deteriorates.

Pollution_Sensor_Cleaning_2.jpg

The cleaning cycle differs depending on the pollution of the surroundings.

Pollution_Sensor_Cleaning_3.jpg

 

CLEANING THE DETACHABLE AIR OUTLET AND GRILLE

Lift the detachable air outlet grille installed on the air outlet to remove it.

Air_Outlet___Grille_1.jpg

Use a soft brush or vacuum cleaner to clean the grille and the air outlet

Air_Outlet___Grille_2.jpg

 

CLEANING THE BACK COVER AND PRODUCT BODY

Use a dry and soft cloth to wipe the back cover and body of the product.
Use a lightly wet cloth if the contamination is high but do not use abrasives.

Back_Cover___Product_Body.jpg