1. Coway
  2. AIRMEGA
  3. Airmega 200M (AP-1518R) FAQ
Submit Request Icon

Back to Support Home
|
  1. Coway
  2. AIRMEGA
  3. Airmega 200M (AP-1518R) FAQ
Cleaning the Airmega 200M (AP-1518R)

MAKE SURE THE UNIT IS TURNED OFF AND DISCONNECTED FROM THE POWER PLUG BEFORE CLEANING

CLEANING THE AIR QUALITY SENSOR (every 2 months)

Use a soft brush or vacuum cleaner for the inlet and the air outlet of the air quality sensor.

200M_-_AIR_QUALITY_SENSOR_1.jpg
Open the air quality sensor cover on the right-hand side of the unit.
Wipe the lens, and dust the inlet and outlet with a dry cotton swab.
200M_-_AIR_QUALITY_SENSOR_2.jpg
Without regular cleaning, the performance of the air quality sensor deteriorates.
The cleaning cycle differs depending on the pollution of the surroundings.

 

CLEANING THE FRONT COVER

Separate the front cover from the rest of the unit.
Use a soft cloth or brush to wipe off the dust on the surface of the front cover.

200M_-_FRONT_COVER.jpg
Use a lightly wet cloth if the contamination is high but do not use abrasives.



CLEANING THE MAIN BODY OF THE PRODUCT (every 2-4 weeks)

Use a dry and soft cloth to wipe the body of the product.

200M_-_PRODUCT_BODY.jpg
Use a lightly wet cloth if the contamination is high but do not use abrasives.





Articles in this section

  • Adust Air Quality Indicator Sensitivity
  • Setting up the Airmega 200M (AP-1518R)
  • Understanding the Airmega 200M (AP-1518R) Air Quality Light Indicator
  • Air Purification System of Airmega 200M (AP-1518R)
  • Filter Replacement for Airmega 200M (AP-1518R)
  • Filter Maintenance for Airmega 200M (AP-1518R)
  • Cleaning the Airmega 200M (AP-1518R)