Filter Maintenance for Airmega 200M (AP-1518R)

MAKE SURE THE UNIT IS TURNED OFF AND DISCONNECTED FROM THE POWER PLUG BEFORE CLEANING

Clean your Pre-filter by following the steps below (typically between 2-4 weeks depending on usage):
Open the front cover and gently pull it.

200M_-_PRE-FILTER_CLEANING_1.jpg

Press down on the top clip of the pre-filter to remove it.

200M_-_PRE-FILTER_CLEANING_2.jpg

Carefully wash with water or vacuum the pre-filter as needed.

200M_-_PRE-FILTER_CLEANING_3.jpg

MAKE SURE THE PRE-FILTER IS COMPLETELY DRY BEFORE INSTALLATION
Once clean, dry and ready for installation then gently put the pre-filter back into its designated slot and attach the front cover.
200M_-_PRE-FILTER_CLEANING_4.jpg

 


Odor LED light will appear if the Deodorization filter needs to be replaced.
(Typically every 6 months)

HEPA LED light will appear if the True HEPA Filter needs to be replaced.
(Typically every year)