Cleaning the Airmega 250/250S

Here are some steps to help with cleaning the Airmega 250/250S:

MAKE SURE THE UNIT IS TURNED OFF AND DISCONNECTED FROM THE POWER PLUG BEFORE CLEANING
Do not use detergents that contain organic solvents (solvent, thinner, etc.), bleach, chlorine, or abrasives.
Please do not put the air purifier in water or spray water directly on it.

FRONT COVER

Gently lift and pull the upper part of the front cover to remove it.

250_-_FRONT_COVER_CLEANING_1.jpg

 

Remove dust with a soft and dry cloth or brush.

250_-_FRONT_COVER_CLEANING_2.jpg

 

After cleaning, fit the cover to the grooves at the bottom of the product and carefully put the cover into place.

250_-_FRONT_COVER_CLEANING_3.jpg
There may be an issue with the unit powering on if the front cover is not attached correctly or securely.

 

 

AIR OUTLET

Gently lift the detachable air outlet grille mounted on top of the air outlet located at the top of the unit.

250_-_POLLUTION_SENSOR_2.jpg
Clean the grille and air outlet with a soft brush or vacuum cleaner.

250_-_POLLUTION_SENSOR_1.jpg

Try brushing it from side to side to prevent pushing dust into the air outlet.

250_-_POLLUTION_SENSOR_3.jpg