Airmega 250/250S Smart Mode (Auto, Sleep, ECO) & Rapid Mode

250_-_MODES.jpg

SMART MODE - AUTO
If the product is set to Smart mode, it automatically adjusts the air speed according to the current air quality around the product. The air speed is adjusted as shown below:
LEVEL 1 - Good Air Quality
LEVEL 2 - Moderate / Unhealthy Air Quality
LEVEL 3 - Very Unhealthy Air Quality

 

SMART MODE - SLEEP

If the product is set to Smart mode, Sleep mode is activated automatically, so that it can reduce noise and power consumption. It activates when the room is dark and the air quality is Good(Level 1) for 3 minutes.

If the light sensor detects light for 5 minutes or longer and/or if the air quality level in the room is Moderate(Level 2) or worse. The Smart mode will activate automatically.

 

SMART MODE - ECO

When set to Smart Mode, if the pollution level remains Good(Level 1) for more than 10 minutes, the fan stops automatically to conserve energy. If the product detects air pollution, the fan will

If the product detects air pollution, the fan will automatically restart. Also, if the ECO mode is maintained for 30 minutes, the fan will restart as well.

250_-_ECO_MODE.jpg

 

RAPID MODE

When set to Rapid Mode and the air quality is maintained at level 1 for more than 5 minutes, it is switched to the smart mode. When the product continues to operate for more than a maximum of 60 minutes, it is switched to the smart mode.

The maximum fan speed in the rapid mode is the same as level 3.