Cleaning the Airmega 150 & 160

MAKE SURE THE UNIT IS TURNED OFF AND DISCONNECTED FROM THE POWER PLUG BEFORE CLEANING
Do not use detergents that contain organic solvents (solvent, thinner, etc.), bleach, chlorine, or abrasives.
Please do not put the air purifier in water or spray water directly on it.

CLEANING THE AIR QUALITY SENSOR (every 2 months)

Use a soft brush or vacuum cleaner for the inlet and the air outlet of the air quality sensor.

150_-_SENSOR_CLEANING_1.jpg
Open the air quality sensor cover on the right-hand side of the unit.
Wipe the lens, and dust the inlet and outlet with a dry cotton swab.
150_-_SENSOR_CLEANING_2.jpg
Without regular cleaning, the performance of the air quality sensor deteriorates.
The cleaning cycle differs depending on the pollution of the surroundings.

 

CLEANING THE FRONT COVER & THE MAIN BODY OF THE PRODUCT

Use a soft cloth or brush to wipe off the dust on the surface.

150_-_FRONT_COVER_AND_BODY_CLEANING_2.jpg150_-_FRONT_COVER_AND_BODY_CLEANING_1.jpg
Use a lightly wet cloth if the contamination is high but do not use abrasives.