MAKE SURE THE UNIT IS TURNED OFF AND DISCONNECTED FROM THE POWER PLUG BEFORE CLEANING

Clean your Pre-filter when the Pre indicator light is on by following the steps below (typically between 2-4 weeks):

Gently pull on the upper part of the front cover to remove it.

Press down on the top clip of the pre-filter to remove it.

Carefully wash with water or vacuum the pre-filter as needed.
MAKE SURE THE PRE-FILTER IS COMPLETELY DRY BEFORE INSTALLATION

Once clean, dry, and ready for installation, gently put the pre-filter back into its designated slot and attach the front cover.

ODOR LED light will appear if the Odor filter needs to be replaced.
(Typically every 6 months)

HEPA LED light will appear if the True HEPA filter needs to be replaced.
(Typically every year)