1. Coway
  2. AIRMEGA
  3. Airmega 230/240 FAQ
Submit Request Icon

Back to Support Home
|
  1. Coway
  2. AIRMEGA
  3. Airmega 230/240 FAQ
Cleaning the Airmega 230 & 240

MAKE SURE THE UNIT IS TURNED OFF AND DISCONNECTED FROM THE POWER PLUG BEFORE CLEANING
Do not use detergents that contain organic solvents (solvent, thinner, etc.), bleach, chlorine, or abrasives.
Please do not put the air purifier in water or spray water directly on it.

CLEANING THE AIR QUALITY SENSOR (every 2 months)

Use a soft brush or vacuum cleaner for the inlet and the air outlet of the air quality sensor.

150_-_SENSOR_CLEANING_1.jpg
Open the air quality sensor cover on the right-hand side of the unit.
Wipe the lens, and dust the inlet and outlet with a dry cotton swab.
150_-_SENSOR_CLEANING_2.jpg
Without regular cleaning, the performance of the air quality sensor deteriorates.
The cleaning cycle differs depending on the pollution of the surroundings.

 

CLEANING THE FRONT COVER & THE MAIN BODY OF THE PRODUCT

How to Clean Front Cover

Use a soft cloth or brush to wipe off the dust on the surface of the
front cover.
* Use a slightly wet cloth to wipe when contamination is high
(Do not use abrasive).

mceclip0.pngmceclip1.png

How to Clean Main Body of Product

Use a dry and soft cloth to wipe it.
* Use a slightly wet cloth to wipe when contamination is high
(Do not use abrasive).

 

Articles in this section

  • Adust Air Quality Indicator Sensitivity
  • Cleaning the Airmega 230 & 240
  • Filter Maintenance for Airmega 230 & 240
  • Air Purification System of Airmega 230 & 240
  • Filter Replacement for Airmega 230 & 240
  • Understanding Airmega 230 & 240 Air Quality Light Indicator
  • Setting up the Airmega 230 & 240