How to clean Pre-filter (Every 2~4 weeks)

PRE LED: Pre-filter

1. The pre-filter can be easily removed without disassembling the product. Pull the Pre-filter handle to take it out.

2. Remove dust with a vacuum cleaner or water depending on the degree of pollution.

3. Dry the pre-filter entirely and install the filter on the product.
* You may hang dry the wet pre-filter on the front cover of the product using the hook at the top of the pre-filter.
* To install the pre-filter, insert it entirely into the product.

4. Reset the indicator by pressing the air quality indicator light on/off button & filter replacement button for more than 3 seconds.

How to Replace Max2 filter (Replace every 12 months)

MAX2 LED: Max2 filter

1. Open the front cover and remove the filter set entirely.
* It prevents dust generation inside the space.

2. Move to where the filter replacement is possible and separate the Max2 filter.

3. Clean / Wash the area except for the filter and dry it before assembling the new filter.
* Check the front display of the filter.
* Assemble the Max2 filter
* Put the Max2 filter, then push the fastening material areas of the frame.

4. After assembling the product, close the front cover.

5. Reset the indicator by pressing the air quality indicator light on/off button & filter replacement button for more than 3 seconds.

TIPS:

- Always unplug the air purifier before cleaning the filter.
- The pre-filter can be restored by removing dust or washing with water.
- Failure to clean the pre-filter for a long time may result in poor product performance.
- The Max2 filter cannot be restored by cleaning. Never wash these filters with water.